| Customization: | Available |
|---|---|
| After-sales Service: | on-Line Service |
| Warranty: | One Year |
Suppliers with verified business licenses
1. High purity processing space;
2. Equipped with a closed sample holder, which enables stable control of the high vacuum state during powder material sintering;
3. Open sample loading platform design, compatible with various forms of samples for sintering experiments.
4. Scientific and reasonable design, enabling easy realization of high vacuum, ultra-high temperature and low radiation of external heat.
| Model Number | RJ-G2600-80TIGF |
| Electrical Specification | 3-phase 380V/50Hz |
| Heating System | |
| Maximum Temperature (Tmax) | 2600°C |
| Working Temperature | Below 2500°C |
| Rated Power | 20KW |
| Furnace Dimensions | L1000×H1270×W650mm |
| Heating Rate | ≤5°C/min |
| Heating Chamber Size | 120×60×60mm |
| Effective Volume | 15ml |
| Heating and sample loading area |  |
| Temperature Sensor | Dual-color infrared pyrometer (Resolution: 0.1°C, Repeatability: ±2°C, IP65) |
| Temperature Control Accuracy | ±1°C |
| Insulation Material | Pressed high-purity graphite hard felt |
| Structural operation mode | The upper opening type heating is fully enclosed, with the furnace body and the upper cover having double-layer water cooling. |
| Control System | |
| Operation Mode | RJ-101EP embedded OS (Chinese/English switchable), 7" color touchscreen, intelligent HMI |
| Temperature Programming | 15 preset temperature curves (20 segments each) with real-time monitoring |
| Temperature Calibration | Non-linear correction system for temperature difference between control and sample |
| Data Recording | Real-time monitoring with dynamic "time-temperature curve" display |
| Safety Protections | Over-temperature alarm, over-current protection, thermocouple break alert |
| Gas supply system | |
| Flow Meter Type | 1 rotameter (MFC optional) |
| Piping core | Special stainless steel gas pipeline (1/4") |
| Valve type | Manual control valve |
| Normal pipeline condition | Normally closed |
| Measurement Accuracy | ±1.0%F.S |
| Linearity | ±0.5%F.S |
| Repeatability | ±0.2%F.S |
| Pressure Range | -0.1-0.15 MPa |
| Response Time | 2s |
| Accuracy Guarantee Temperature | 15-35°C |
| Vacuum system | |
| Mechanical Vacuum Pump | 10C direct connection diaphragm vacuum pump (Double-stage Diaphragm) |
| Pumping Rate | 10 L/s |
| Connection Port | KF16/25(mm) |
| Oil Capacity | 0.6-1L |
| Motor Speed | 1440 rpm |
| Operating Environment Temperature | 5-40°C |
| Noise Level | ≤56 dB |
| Turbomolecular Pump | FJ-110 |
| Pumping speed | 100L/s |
| Rated speed | 4300rpm |
| Cooling method | air/water |
| Else | |
| Vacuum Gauge | Analog vacuum gauge |
| Ultimate Vacuum | 4.3×10^-3Pa |
| Service Support | One-year limited warranty, with lifetime support (components that are easily worn out are excluded from the warranty coverage) |
){kind=link}