| Customization: | Available |
|---|---|
| After-sales Service: | on-Line Service |
| Warranty: | One Year |
Suppliers with verified business licenses
This equipment is composed of a high-temperature heating system and an automatic control system. The heating system consists of a control circuit and a furnace chamber. The furnace lining is made of vacuum-formed high-purity alumina lightweight material, and imported high-temperature alloy resistance wires are used as heating elements. Stainless steel tubes cross the middle of the furnace body to form the furnace chamber. The ends of the furnace tubes are sealed with stainless steel flanges, and the heating elements are parallel to the furnace tubes, which can effectively ensure the uniformity of the temperature field. The temperature measurement adopts a stable K-type thermocouple to improve the accuracy of temperature control.
| Model | RJ-T1200-100T32ZD | |
| Electrical Specification | 3-phase 380V, 50Hz | |
| Max Temperature (Tmax) | 1200°C (<1 hour) | |
| Rated Temperature | 1150°C | |
| Rated Power | 30 kW | |
| Touch Screen Size | 10 inches | |
| Temperature Sensor | K-type thermocouple | |
| Furnace Tube Size | Φ273 × 2190 mm | |
| Furnace Tube Material | 310S stainless steel | |
| Furnace Dimensions (L×D×H) | 2400 × 1150 × 2400 mm | |
| Recommended Heating Rate | 10 °C/min | |
| Main monitoring interface |  |
|
| Mechanical operation interface | |
|
| Temperature control accuracy | ±1ºC | |
| Control system | |
1. Sintering process curve setting: Dynamically display the setting curve. The equipment can pre-store multiple sintering process curves, and each curve can be freely set. 2. Appointment-based sintering, enabling unmanned operation of the sintering process curve sintering. 3. Real-time display of sintering power, voltage and other information, and recording of sintering data. It can also be exported to achieve paperless recording. 4. Possesses the function of remote control and real-time observation of the equipment status. 5. Temperature correction: The difference between the main control temperature and the sample temperature. Non-linear correction is carried out throughout the sintering process. |
| Low-corrosive gas preheater (optional) | |
The entire body is made of 316L material. It can preheat various gases and corrosive gases, meeting special process requirements. The maximum temperature can reach 600ºC. |
| Weight | Approx900KG | |
| Equipment Usage Notes | During installation or maintenance, one should avoid colliding with the terminals of the heating wire to prevent it from breaking. 1. The equipment should be placed in a dry and ventilated area. 2. After the first installation, before using the equipment, check whether the wiring is in good condition. 3. During use, the furnace temperature should not exceed the rated temperature to avoid damaging the heating element and the metal furnace tube. 4. There should be no conductive dust, explosive gases, corrosive gases, liquids around the equipment. 5. Regularly inspect the electrical control box to keep it clean and free of dust accumulation. During cleaning, it is possible to blow it with a dry brush or "skin brush" while cutting off the external power supply. 6.During the operation of the equipment, it is necessary to frequently check the changes in exhaust volume and the pressure inside the furnace tubes to prevent the pressure inside the tubes from rising due to blocked exhaust outlets. 7. During operation, there may be local high temperatures. Please be careful to prevent burns. 8. After the equipment is powered on, if an alarm occurs, check and eliminate the fault before running the equipment. |
|
| Service Support | One-year limited warranty, with lifetime support (components that are easily worn out are excluded from the warranty coverage) | |
){kind=link}